banner
Home » Product > Cathode Hanger Bars > Copper-clad Hanger Bar
Product Categories

Copper-clad Hanger Steel Bar

1.Stainless steel header bar is made out of copper core which is covered with stainless steel sleeve
2.cathode design has 45 degrees chamfered corners cut away from the bottom of the blade
3.The “v” groove runs the length of the blade and up the chamfered corners

Send Inquiry

Stainless steel header bar is made out of copper core which is covered with stainless steel sleeve. And cathode design has 45 degrees chamfered corners cut away from the bottom of the blade. The “v” groove runs the length of the blade and up the chamferred

corners. The dimensions of the chamfered corners are 60mm x 60mm. These

dimensions have been chosen to maximise the tearing action, whilst reducing the

chances of bending the cathode corners or producing a ropey edge that would

potentially entrap falling slimes. The tearing action produced by the corner chamfers

initiates the split of the copper sheets and improves splitting if lamination has

occurred.


Hot Tags: copper-clad hanger steel bar, China, suppliers, manufacturers, factory, plant

Inquiry